6AV3607-1JC20-0AX2 Siemens OP7 DP Keypad Plastic Case

Order each part separately is available

The 6AV3607-1JC20-0AX2 OP7/DP OPERATOR PANEL uses an MMC (Multi Media Card), tested and approved by Siemens AG can be used as an external storage medium. The memory card is an option and can be ordered separately. The Siemens OP7 HMI device fulfills the requirements stipulated in the law on EMC in Germany as well as the EMC guidelines of the European Union.

The Siemens OP7 6AV3607-1JC20-0AX2 is upwards compatible with the OP5. All cabling can continue to be used. Existing OP5 configurations can be converted automatically for the OP7 by means of the ProTool configuration software. And it uses 1 x RS232/TTY for connecting to the PLC/computer/printer or 1 x RS422/485 for connecting to the PLC/computer.

Time response of data updating with the OP7 6AV3607-1JC20-0AX2, updated and newly created data are stored in a non-volatile flash memory. This means that current data are immediately available following an OP re-start. The flash memory cannot be accessed while data are being updated, and the OP cannot be operated. The update rate is determined by the time response of the delete and write cycles of the flash memory. For technological reasons, this rate is slower than the access time for volatile memories.

Product Video:

The video below describes the product details of the Siemens 6AV3607-1JC20-0AX2 OP7/DP OPERATOR PANEL Membrane Keypad and Case(shell).